LED Flood Lights
If you’re looking to upgrade your home or business outdoor lighting, consider LED flood lights. These powerful fixtures deliver security level illumination for large areas like parking lots, streets and sidewalks.
They are also ideal for illuminating flags, building facades and other landscape features. To find the right LED flood light for your needs, you should consider a few key factors: wattage, color temperature and lumens.
Color Temperature
LED flood lights are used in a wide variety of applications. They can be found in office buildings to light up hallways or illuminate the parking lot. They are also used in stores to increase visibility for customers. They are also great for large areas that require brighter lighting such as warehouses.
LED’s have a much longer lifespan than traditional HID lamps. They are also more efficient and do not generate as much heat, reducing the amount of energy they use. In addition, LED’s have a low lumen degradation rate. This means that their light output will decrease slowly over time, resulting in a long lifespan for the fixture.
Another important factor to consider when choosing a flood light is its color temperature. Color temperature is a measure of how warm or cool a lamp appears. Higher color temperatures have a warmer appearance, while lower ones are cooler. A typical range for flood lights is 3000K to 6500K.
The type of bulb a flood light uses will also affect its maintenance. Common types of bulbs include BR, PAR, and MR. BR bulbs are typically best for indoor locations that require broad area lighting but do not need extreme brightness. PAR and MR bulbs are better suited for focusing light in one direction, similar to a spotlight. The base of a flood light can vary as well. Mounting options such as a Trunnion mount and knuckle mounts allow the fixture to be aimed in different directions. They may also be embossed with angle markings to facilitate field aiming.
Lumens
LED flood lights provide a substantial volume of lumens for area, roadway and task lighting led flood lights applications. They are used to spotlight or accentuate architectural features with a tightly focused beam, or to evenly illuminate large outdoor areas and vertical surfaces. They can be mounted to poles, walls or in the ground and may be provided with mounting accessories such as knuckles, slipfitters, trunnions or yokes that simplify installation and facilitate field aiming adjustments.
Unlike HID lamps, LED luminaires do not generate heat in the form of infrared radiation, so they produce very little waste energy. However, they do emit a significant amount of thermal energy in the form of wasted current at the semiconductor junction and phosphor layer. This excess heat dwells on the semiconductor devices and accelerates degradation and failure. The system into which LED packages are assembled to provide thermal management, optical control and drive current regulation has a huge impact on unlocking the full performance potential of these complex systems.
LED flood light manufacturers can optimize a fixture’s lumen package to meet the needs of specific application requirements by choosing the most suitable type of LEDs, lens, drivers and power supplies. For example, chip-on-board (COB) LEDs use multi-chip dies bonded on an MCPCB or a ceramic substrate to reduce the number of discrete components and increase the efficiency of the package. These systems also allow the LEDs to be directly mounted on the heat sink, further reducing assembly costs.
Energy Efficiency
The energy efficiency of led flood lights is a key aspect to consider when choosing one for your home. They use up to 90% less energy than traditional flood lights. This means you can save on electricity bills, while protecting the environment. They also have a longer lifespan than traditional sources, making them an economical choice.
LED flood lighting has a high lumen output and is suitable for outdoor and large open spaces. This light is ideal for sports arenas, parking lots and stadiums because it can illuminate the entire area effectively. It has an adjustable beam spread and can be used with a motion sensor for added security. It led flood lights is available in both symmetrical and asymmetrical distributions. The asymmetrical luminaires have separate horizontal and vertical beam designations, while the symmetrical ones are classified with a single NEMA number.
The maintenance of led flood lights is relatively easy, as they do not need to be replaced often. The LEDs inside them are not vulnerable to heat and humidity, and they can resist sudden changes in temperature. The lamps are also resistant to shocks and stresses, so they are durable and withstand harsh weather conditions.
Led flood lights are also useful in public spaces, as they can provide enough illumination for pedestrians at night. This helps deter crime and makes it easier for security personnel to spot criminal activity. They can also be used to highlight statues and other static elements in a park or museum. They can even be used to enhance the texture of a building’s exterior.
Maintenance
A high powered LED flood light is a great way to illuminate your property after the sun goes down. LEDs use less electricity than other types of lighting, so they can last a long time and require very little maintenance. They also produce very little heat, making them safe for any environment. These lights are available in a variety of colors, sizes, and wattages to suit your lighting needs.
You should always check your fixture to ensure that it is working correctly. If the bulbs are flashing or flickering, they may need to be replaced. If the bulbs are not the issue, the problem could be caused by a bad dimmer switch or other internal electrical problems.
Depending on the type of flood light you have, you will need to consider what kind of maintenance is required. For example, if you have an AC floodlight, it will need an inverter to convert DC power from your batteries into AC before supplying power to the fixture. This extra step can add to the initial setup and ongoing maintenance costs of the system.
On the other hand, if you have a DC device that draws DC power directly from your batteries, there is no need for an inverter, and you will save on installation and maintenance costs. In addition, LEDs have a longer lifespan than other types of lighting, so you will save on replacement costs as well.
